STEP 1 S1

Hydrogen Fuel Energy Storage Plant 

This Product Solution " Step 1 S1 " As it is named, forms the first step for every community to establish a foundation for Hydrogen Energy Storage and Pathway for community services training and downstream product deployments. 

 

 The Space Required is 1 acre of land with a access road .

Step 1 us  primarily used to provide MW Class  backup to Micro Grids and make oxygen releasing islands in and around Communities where you Live. It form the Idea Working Pilot with good gas sales abilities. We call it the Swiss Knife of Hydrogen.

As it is Highly adaptable  and can use reformers in replace of electrolyzers.

Step 1 is the correct choice for all communities to start correcting the huge un balances in the air quality and  start re balancing oxygen against the  poisonous emissions in the communities air whilst backup up microgrids and making new products for new roi from stranded power or spinning power reserves .

We at Secure Supplies ask every one to ask the question.

" If the Wind Stopped where would the oxygen come from in your community for the air you breath ?

How many Poison air makers do you have sending up un breathable gas in your community?"

Secure Supplies is actively making wind ,solar and geothermal owners aware that in

MW class, batteries are not a suitable production collapse backup. 

At best the most advanced system will proved 3 to 4 hrs of MW class back at full load, than they are flat empty of power.

If we are to move to 100% renewable power from mother nature.

To supply community  power grids with green energy,  we need to have the equivalent green fueled backup ready in Mw class, 

Rather than roll out diesels, which are worst polluters. Secure Supplies has designed a proprietary system to make and store hydrogen to run green fueled power plants.

This system is being sold and install globally.

If run times are required beyond what is stored ,we have designed into the system a green fuel pod delivery system. To have hydrogen delivered,if required above what is stored. 

This keeps the prime power back up running 24 hrs at full load if need be until renewable sites comes back on line. 

We all at  Secure Supplies believe this is the best green energy storage and back up  choice for MW class power projects.

If you have signed cross fence power PPA contracts, you may want to have

a MW Class backup. 

 

Our System also allows for strand power to be delivered on a regional basis as a green  gas fuel .

Ordering is Straight forward simply contact Secure Supplies with your requirements.

 

Solutions 

  STEP 1

Secure Supplies provides you with 

a Needs Analysis and Design Development.

 

  • Tank Design

  • Flow Rate Design,

  • Pressure Design

  • Fill Rate System Design 

  • Cooling system Design

  • Traielr Design

  • Compressor Design

  • Safety System Design 

  • Monitoring Design 

  • Operation and Maintenance Planning

 

To order your Hydrogen Tank Pod and Trailer Units for your projects Please Contact 

Daniel Donatelli 

Founder

Secure Supplies 

Whatsapp + 1 520 848 1659 

danieldonatelli1@gmail.com 

Stationary Hydrogen Filling Station

 

Main Parameters:
Coverage: about 4,000m2  1 acre
Construction Period: about 6 months
Daily Hydrogen Filling Capacity: not less than 100kg/200kg/500kg 1500,kg 2500kg,4000kg
Hydrogen Compression: rated working pressure 45Mpa/ to 87.5Mpa
Compressor Form: booster pump / diaphragm compressor
Hydrogen Storage: 45Mpa/87.5Mpa
Hydrogen Filling: rated working pressure 35Mpa/70Mpa
Hydrogen Filling Flow Rate: 60kg- 200Kg/min
Hydrogen Supply Method: external hydrogen supply /electrolyzed water to produce hydrogen

Category: Hydrogen Engergy Application System

Description

The main equipment of the external hydrogen supply hydrogen filling station consists of a hydrogen unload column (unloading hydrogen from a long tube trailer), a hydrogen diaphragm compressor, a hydrogen storage cylinder group, a hydrogen filling machine, etc.

When the hydrogen filling station adopts the external hydrogen supply mode as the hydrogen source, that is, the hydrogen in the long pipe trailer is compressed into the high-pressure hydrogen storage cylinder group through the high-pressure compressor through the unload column, a long pipe trailer unload position is set at the hydrogen filling station. When the unloading is completed, the long tube trailer can be directly off the station.

After the hydrogen is stored in the hydrogen storage cylinder group, it is divided into high and medium groups, and formed into a high, medium and low three-stage filling cylinder group mode together with the lone pipe trailer to realize the graded filling of the hydrogen fuel cell vehicle.

 

The advantage of this design is that the efficiency is high and the filling time is short, and at the same time it has both safety and reliability. It can ensure that 10 fuel cell buses (8×140L hydrogen storage cylinders) filling indicators, and the filling time of a single bus is ≤20min.

According to the process requirements and design control requirements of the hydrogen filling station, the station control system takes the data acquisition control system and the host computer as the core to form a station monitoring system to realize the monitoring of the entire production process.

Secure Supplies  is ready to get Started on your Power Plant Project Are you ?

PLEASE Contact us now to 

GET THE PROCESS STARTED

 

We will Touch base on phone

and email shortly to Discuss a POWER PLANT PROPOSAL  .

Contact Us

Wechat

Whatsapp

Whatsapp qr-code.png

Skype

Skype qr-code (1).png

About Us

Secure Supplies Group is

an international collective of Engineers and High Technology Companies with a shared passion for promoting the world's most exciting

Hydrogen and Renewable Energy Solutions.

Strategic Partners 

       Line

Secure Supplies  Social

 Facebook- @SecureSupplies

 Twitter      @SecureSupplies

 Instagram - SecureSupplies​

 Pinterest   - Secure.Supplies

 Minds         - SecureSupplies 

 Youtube       - SecureSupplies

Contact Us

United States 

Daniel Donatelli

Founder

Lets Talk  Whatsapp  
USA + 1 (520) 848-1659
Skype danieldonatelli@hotmail.com 

Email  danieldonatelli1@gmail com 

  • 01ab6619093f45388d66736ec22e5885
  • 23fd2a2be53141ed810f4d3dcdcd01fa
  • eb9767422f0e4c41a507d3e67c4ebac8
  • 6cc776af25744f77ab9c420b98d1abe6
Swagelok-hydrogen-gas-fittings

Manufacturing  Partners

Event Partners

Secure Supplies Energy Power Gas Magazine ™

All Rights Reserved Worldwide. Copyright © 2012 Secure Supplies Limited Daniel Donatelli © 2009 

TRADEMARKS BELONG TO THEIR RESPECTIVE OWNERS. ALL RIGHTS RESERVED

 No duplication is permitted of this site graphically or
conceptually unless requested and approved in writing.

TERMS OF SERVICE // PRIVACY & COOKIE POLICY // LEGAL NOTICES // ADVERTISING OPPORTUNITIES // MODERN SALVERY POLICY // HSE POLICY

Work with us Employment  

본 사이트는
.com
사이트 제작 도구로 제작되었습니다. 지금 나만의 사이트를 만들어보세요.
시작하기