GO Faster Go Further
Established since 2001
Hydrogen Hot Rodding™ ©
Secure Supplies Group
Stephen Meyer
Stephen Challenged all of us to learn
"How Do Snow Flakes Get Made?"
" I am really looking for the answer to that Question?"
Here is the answer it applies to the following
-
Water to gas vapor ,
-
Concentrations of dissolved gases.
-
Extracting and carrying electrons via o2
-
and the Magnetic strengthen of crystalline lattices,
those skilled in the art will value this information to come out in a time of great need.
As Mentioned in the Bible, The Secrets lock in and of Snow.
here is the video
Stephen Meyer`s Signal Replication
•23 Nov 2014
Stephen Meyer`s Waveform replication
•2 Sep 2018
Stephen Meyers Trifilar
9XG Alternator
Now, the three coils, placed on "common ferrite core", have equal number of turns (the "3-filar coil" is "not tuned"), only C2, is connected on "opposite direction".
The Osciloscope probe is connected between the "Test point T1" (Input) and "Test point T2" (Ground).
Very important: To the "Impedance matching circuit" is applying "only" Sinusoidal signal, with fixed frequency about 500 Hz. The "ringing" Resonant signal at 13,5 kHz, is "forming" from the Resonance inductors.
Important note: 1981 schematic of phase 4 voltage intensifier circuit this tells me it took 10 years to find the winding recipe for chokes:
Stephen Meyer`s Patent US 2005/0246059 A1:
My Circuit diagram:
My 3-filar coil:
"Output signal" to the Water Fuel Cell:
The "Ringing" Resonant signal (the Inductors "not tuned"):
"Identical" Stanley Meyer's circuit diagrams, with "third electrode" added:
Expanded Notes
Stephen Meyer`s 3-Electrode Water Fuel Cell
Apr 17, 2022
Valentin Petkov /valyonpz/
Now, the three Resonance coils is placed on "common ferrite core",
and they have equal number of turns (the "3-filar coil" is "not tuned").
The "Anode" Inductor L1 and the "Reference" Inductor L3, are connected in the "same direction".
Only the "Cathode" Inductor L2, is connected in "opposite direction".
The Osciloscope probe must be connected between "Test point T1" (Input) and
"Test point T2" (Ground), as described in the Patent US 2005/0246059 A1:
https://drive.google.com/file/d/10Lnbr8-4s70WgNZStITdNlrxH1WRmHdk/view
https://drive.google.com/file/d/1NBXroLnfD3y-CYA2rdyIkT02c8fG60My/view
.jpg)
=============================================================
It`s very important: To "Impedance matching circuit", is applying "only"
clear sinusoidal signal, with fixed frequency about 500 Hz. The "ringing"
Resonant signal at 13,5 kHz, is "forming" from the Resonance inductors.
Not "gate", not frequency scanning..
============================================================
Important note: 1981 schematic of phase 4 voltage intensifier circuit
this tells me it took 10 years to find the winding recipe for chokes:
https://drive.google.com/file/d/1CtMGGV7XexNaX_PwunbmJiHD7jGP1_KU/view
.jpg)
============================================================
Stephen Meyer`s Patent US 2005/0246059 A1:
"... It is this composite signal applied to the surface of the stainless steel
elements in array 132 submerge in water bath 133 that allow the ions from the
elements in array 132 to cross its water 133 surface barriers and contribute to
the hy-droxyl production. Note the dc bias voltage +,− on either side of the center
electrical reference point OV in FIG. 5. It is this bias voltage being modulated
by multi polarity differential signals from 102 FIG. 4 that contributes to the
wave-guide action of arrays 132..."
"...The result of this is just like the operation of a radio transmitter matching
its signal to the air via the antenna impedance. Refer to FIG. 3 showing the
relationship of this configuration to arrays 132, water bath 133 and Signals FIG. 5,6..."
https://patents.google.com/patent/US20050246059
============================================================
My Circuit diagram:
https://drive.google.com/file/d/1eEvpcipKHj25Pldxg9jMAdkz1FMLbRNq/view
.jpg)
=============================================================
My 3-filar coil:
https://drive.google.com/file/d/1zq5bhFLRtYy5l073FrQP1-_-ZISyiyc0/view
.jpg)
=============================================================
"Output signal" to the Water Fuel Cell:
"... Also, the frequency of FIG. 5 is adjusted to match the
electrical wave-length of the arrays 132 FIG. 3 and the impedance
of water bath 133..."
https://drive.google.com/file/d/1bUl-fV61j3Snzw9-4L2Q8SUd7JAC84D_/view
=============================================================
The "Ringing" Resonant signal (the Inductors "not tuned"):
"... FIG. 6 shows the high-frequency ringing signals that contribute
to the operation of the hydroxyl production. Just as a tuning fork rings
when struck by a hammer, so does the wave-guide elements in arrays 132
immersed into the hydroxyl generating liquid 133 then struck by the
electrical signals FIG. 5,6 from impedance matching circuits
102 depicted in FIG. 4..."
https://drive.google.com/file/d/1JpRLBaWr_1j4ndemWTssWCoWZSEbvO0r/view
.jpg)
=============================================================
Here is, how to the inductor`s direction, affects to the shape
of the Resonant waveform (the "3-filar coil" is "not tuned"):
https://drive.google.com/file/d/1mx-803b_J9YDfc0YS27C9avPeb97tRhU/view
.jpg)
============================================================
"Identical" Stanley Meyer's circuit diagrams, with "third electrode"
added:
https://drive.google.com/file/d/1iZMyCg_Qnn31zuCaNnu6wSPMzMbjUZbm/view
https://drive.google.com/file/d/1SZ0DPZlaGuGSwUyHPLyilnkSzrTPgLh5/view
.jpg)
.jpg)
=============================================================
The "oldest" Stanley Meyer`s invention, use Car Alternator as
AC Sinusoidal power source:
https://drive.google.com/file/d/19sghzMLW2fZtMHKXX0puvA40dlCuGxzc/view
https://drive.google.com/file/d/15ObvfJdWTXg4TkbW2UEGSkSoRUe5cHh5/view
https://drive.google.com/file/d/1tkju3dpe4C4dyfBnPOiU4uumE8-eEfI2/view
https://drive.google.com/file/d/1fdr-MiBEwz2iwjTRrSbL_mAvFSow3iIS/view
_JPG.jpg)
.jpg)
.jpg)
.jpg)
